unisonic technologies co., ltd 2sc2328a npn epitaxial silicon transistor www.unisonic.com.tw 1 of 2 copyright ? 2012 unisonic technologies co., ltd qw-r211-008.c audio power amplifier ? features * collector dissipation pc=1 w * 3 w output application * complement of 2sa928a ? ordering information ordering number package pin assignment packing lead free halogen free 1 2 3 2SC2328AL-X-T92-B 2sc2328ag-x-t92-b to-92 e c b tape box 2sc2328al-x-t92-k 2sc2328ag-x-t92-k to-92 e c b bulk 2sc2328al-x-t92-r 2sc2328ag-x-t92-r to-92 e c b tape reel 2sc2328al-x-t9n-k 2sc2328ag-x-t9n-k to-92nl e c b bulk 2sc2328al-x-t9n-b 2sc2328ag-x-t9n-b to-92nl e c b tape box note: pin assignment: e: emitter c: collector b: base
2sc232a npn epitaxial silicon transistor unisonic technologies co., ltd 2 of 2 www.unisonic.com.tw qw-r211-008,c ? absolute maximum rating (t a =25 , unless otherwise specified) parameter symbol ratings unit collector-base voltage v cbo 30 v collector-emitter voltage v ceo 30 v emitter-base voltage v ebo 5 v collector dissipation to-92 p c 500 mw to-92nl 625 collector current i c 2 a junction temperature t j 150 storage temperature t stg -55 ~ +150 note: absolute maximum ratings are those values beyond which the device could be permanently damaged. absolute maximum ratings are stress ratings only and functiona l device operation is not implied. ? electrical characteristics (t a =25 , unless otherwise specified) parameter symbol test conditions min typ max unit collector-base breakdown voltage bv cbo i c =100 a, i e =0 30 v collector-emitter breakdown voltage bv ceo i c =10ma, i b =0 30 v emitter-base breakdown voltage bv ebo i e =1ma,i c =0 5 v collector cut-off current i cbo v cb =30v, i e =0 100 na emitter cut-off current i ebo v be =5v, i c =0 100 na dc current gain (note) h fe v ce =2v, i c =500ma 100 320 base-emitter on voltage v be ( on ) v ce =2v, i c =500ma 1 v collector-emitter satu ration voltage v ce ( sat ) i c =1.5a, i b =0.03a 2 v output capacitace c ob v cb =10v, i e =0, f=1mhz 30 pf current gain bandwidth product f t v ce =2v, i c =500ma 120 mhz ? classification of h fe rank o y range 100-200 160-320 utc assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other parameters) listed in products specifications of any and all utc products described or contained herein. utc products are not designed for use in life support appliances, devices or systems where malfunction of these products can be reasonably expected to result in personal injury. reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. the information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice.
|
